Controllers, Tools, Power Supplies, Accessories

ALL Pro HO Slot Car Professional Controller by OS3 - Blue - with Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be BLUE.

Wire colors are red, white, black.

Comes with Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$219.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Blue - without Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be BLUE.

Wire colors are red, white, black.

Does NOT include Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$199.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Clear - without Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be CLEAR.

Wire colors are red, white, black.

Does NOT include Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$199.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Purple - with Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be Purple.

Wire colors are red, white, black.

Comes with Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$219.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Purple - without Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be Purple.

Wire colors are red, white, black.

Does NOT include Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$199.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Red - with Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be Red.

Wire colors are red, white, black.

Comes with Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$219.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Red - without Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be Red.

Wire colors are red, white, black.

Does NOT include Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$199.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Yellow - with Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be Yellow.

Wire colors are red, white, black.

Comes with Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$219.95

Details

Qty:

ALL Pro HO Slot Car Professional Controller by OS3 - Yellow - without Clips

OS3 HO ALL Pro Professional HO Slot Car Controller

Professional grade transistorized HO slot car controller. Unit has a separate transistor circuits for running power and the coast feature. This allows the sensitivity circuit to be independent of the coast feature. Unit also has an adjustable choke feature that clips power off the top end to calm down pipey cars. Unit has 3-position slide switch for greater sensitivity ranges.

Handle color will be Yellow.

Wire colors are red, white, black.

Does NOT include Clips.

Please read the additional item description.

This is the standard controller at HC Slots that all Ready To Run cars are tested with after assembly.

$199.95

Details

Qty:

Auto World HO Slot Car Factory Adjustable Power Supply - 9 to 24 Volts

Auto World HO Slot Car Power Supply - 9 to 24 Volts

You get one factory adjustable power supply. Adjustable for 9 volts to 24 volts so you can 'tune' your track for young drivers to keep the cars from flying off the track as much. 2 Amps current lets you run magnets cars with less stress.

Works on Auto World and Tomy AFX race sets. It does not plug into other brands like Tyco or Life Like.

$29.95

Details

Qty:

Auto World HO Slot Car Factory Set Controller Pair - 40 Ohm

Auto World HO Slot Car Controllers - 40 Ohm

You get one set of 40 Ohm HO slot car set controllers.

These work on Auto World and Tomy AFX race sets. They do not plug into other brands like Tyco or Life Like. These controllers will work better on hopped up HO slot cars much better than the Tomy AFX 120 Ohm controllers. So if your Tomy AFX 120 controllers are not much more than an "on-off" switch for your better HO cars, try these.

If you are good with splicing and soldering electrical wires, you can retro-fit these to other brands of sets by using their plugs. NO warranties if you do this.

$22.95

Details

Qty:

DiFalco Design DD505 Neo 2-Wire Transistorized H.O. Controller - Runs T-Jets to Modifieds - Black

DiFalco Design DD505 Neo 2-Wire Transistorized HO Slot Car Controller

Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long and super flexible 16 gauge main wires. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity rheostat. Reverse polarity diode. These controllers all feature our standard 290 ohm network that will control most H.O. cars.

Wire color may be different than photos.

Neo controller. 17 band design 2 wire controller with a wide range sensitivity rheostat to adjust for T-jet and Fray cars down to most faster magnet cars.

$89.95

Details

Qty:

DiFalco Design DD505 Neo 2-Wire Transistorized H.O. Controller - Runs T-Jets to Modifieds - Red

DiFalco Design DD505 Neo 2-Wire Transistorized HO Slot Car Controller

Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long and super flexible 16 gauge main wires. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity rheostat. Reverse polarity diode. These controllers all feature our standard 290 ohm network that will control most H.O. cars.

Wire color may be different than photos.

Neo controller. 17 band design 2 wire controller with a wide range sensitivity rheostat to adjust for T-jet and Fray cars down to most faster magnet cars.

$89.95

Details

Qty:

DiFalco Design DD505 Neo 2-Wire Transistorized H.O. Controller - Runs T-Jets to Modifieds - Yellow

DiFalco Design DD505 Neo 2-Wire Transistorized HO Slot Car Controller

Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long and super flexible 16 gauge main wires. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity rheostat. Reverse polarity diode. These controllers all feature our standard 290 ohm network that will control most H.O. cars.

Wire color may be different than photos.

Neo controller. 17 band design 2 wire controller with a wide range sensitivity rheostat to adjust for T-jet and Fray cars down to most faster magnet cars.

$89.95

Details

Qty:

DS Electronic Racing Products - 35 Ohm HO Slot Car Controller

DS Electronic Racing Products - 35 Ohm HO Slot Car Controller

Solid state HO slot car controller. Unit has a printed circuit board for exceptional trigger feel. This unit is a hands-down superior product to the Parma wire-wound resistor technology. You won't believe how smooth the unit is !!!

NOTE: Alligator Clips are NOT included. Clips are available as a separate item. Most magnet cars will not need the red brake clip hooked up.

Controller handle color is NOT an option.

1) 25 ohm Controllers good for: hopped up Life Like "T" cars, hopped up Tomy Super G Plus, Viper 6 ohm Level 4 cars, Viper 3 ohm Level 10 cars, BSRT G3 cars, Wizzard Storm cars.

2) 35 ohm Controllers good for: hopped up Life Like "T"and "M" cars, hopped up Tomy Mega-G, Tomy Super G Plus, Viper 6 ohm Level 4 cars, BSRT 902 cars, hopped up Tyco 440 style cars.

3) 45 ohm Controllers good for: Mega-G +, Tomy Super G Plus and SRT, 9 ohm in-line cars, stock factory Life Like "T" and "M" cars, stock factory Tyco 440 style cars.

$49.95

Details

Qty:

HCS AMG - Full Size Tire Gauge Tool - .300" to .500"

HCS AMG - Full Size Tire Gauge - .300 to .500

Introducing the official Harden Creek Slot Cars Tire Gauge. This gauge is full size to master most all HO tire size applications.

The gauge is divided into general front and rear tire sizes that are encounted on most in-line chassis situations.

Gauge can certainly be used for T-Jet and other types of HO slot cars. Tires must be mounted on rims to achieve meaningful results.

Black anodized aluminum with laser engraved numbers.

$27.95

Details

Qty:

HCS AMG - Pinion Installation and Removal Tool

HCS AMG - Pinion Installation & Removal Tool

The proper tool needed to hold pinion gears while pressing them onto the armature shafts. Makes short work of installing and adjusting pinion gears.

Pinion capturing pockets are made to handle many popular 7 and 8 tooth gears.

Top pocket with the .063" nipple hole is a general application hole.

The middle pocket with the .062" nipple hole is great for HCS, JAG, and BSRT 8T gears.

The bottom pocket with the .060" nipple hole is for Viper and BSRT 7T gears.

Blue anodized aluminum with laser engraved numbers.

$9.95

Details

Qty:

HCS AMG - Replacement Pin .053" for Wheel Hub Puller Tool

Replacement Pin for Wheel Hub Puller Tool

You get One (1) pin to replace bent puller pins.

To replace pin there are a few things to do. Remove threaded rod from housing. The pin is held in by friction and Loctite.

Heat the pin with a lighter or match. This will soften the Loctite. Hold the knob and grasp the pin with pliers and twist the pin and pull and the same time.

The pin should come out. New pin may need to be seated into the treaded rod with mild taps from a small hammer.

Note: pin will not work in the Gear & Hub Puller. That tool has a slightly larger pin.

$1.00

Details

Qty:

HCS AMG - Replacement Pin .055" for Wheel Hub & Gear Puller Tool

Replacement Pin for Wheel Hub & Gear Puller Tool

You get One (1) pin to replace bent puller pins.

To replace pin there are a few things to do. Remove threaded rod from housing. The pin is held in by friction and Loctite.

Heat the pin with a lighter or match. This will soften the Loctite. Hold the knob and grasp the pin with pliers and twist the pin and pull and the same time.

The pin should come out. New pin may need to be seated into the treaded rod with mild taps from a small hammer.

Note: pin will not work in the Wheel Hub Puller. That tool has a slightly smaller pin.

$1.00

Details

Qty:

HCS AMG - Wheel Hub & Gear Press Tool

HCS AMG - Wheel Hub & Gear Press Tool

CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool. Pushes hubs and gears onto axles in or out of the chassis. Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs. Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors.

This is a must have tool when rebuilding or building inline HO slot cars. You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

$25.95

Details

Qty:

HCS AMG - Wheel Hub & Gear Puller Tool

HCS AMG - Wheel Hub & Gear Puller Tool

CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear removal tool. Removes gears from rear axles, rear hubs with the axle out of the chassis. This is a must have tool when rebuilding or building inline HO slot cars. You'll wonder how you lived this long with out one !!!

Makes short work of pulling and adjusting crown gears and wheel hubs. Axles not included.

$21.95

Details

Qty:

HCS AMG - Wheel Hub Puller Tool

HCS AMG - Wheel Hub Puller Tool

CNC machined 1 piece Aluminum HO slot car Wheel Hub removal tool. Removes rear hubs with the axle in or out of the chassis. Advanced design allows tool to work in tight quarters to remove or adjust out rear hubs with the axle in the chassis. This is a must have tool when rebuilding or building inline HO slot cars. You'll wonder how you lived this long with out one !!!

Makes short work of pulling and adjusting wheel hubs. Chassis not included.

$18.95

Details

Qty:

HCS AMG - Wheel Hub/Gear Press and Wheel Puller Tool Package

HCS AMG - Wheel Hub & Gear Press Tool

Press: CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool. Pushes hubs and gears onto axles in or out of the chassis. Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs. Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors.

Puller: CNC machined 1 piece Aluminum HO slot car Wheel Hub removal tool. Removes rear hubs with the axle in or out of the chassis. Advanced design allows tool to work in tight quarters to remove or adjust out rear hubs with the axle in the chassis.

These are must have toolswhen rebuilding or building inline HO slot cars. You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

$42.95

Details

Qty:

HCS AMG - Wheel Hub/Gear Press and Wheel/Gear Puller Tool Package

HCS AMG - Wheel Hub/Gear Press and Wheel Hub/Gear Puller Tools

Press: CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool. Pushes hubs and gears onto axles in or out of the chassis. Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs. Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors.

Puller: CNC machined 1 piece Aluminum HO slot car Wheel Hub/Gear removal tool. Removes rear hubs and gears with the axle out of the chassis.

These are must have tools when rebuilding or building inline HO slot cars. You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

$45.95

Details

Qty:

HO Slot Car Oiler - Viper Juice

HC Slots "Viper Juice" Slot Car Oiler

Just what you need on the work bench or track-side. The best synthetic oil available.

Refillable bottle design.

$5.95

Details

Qty:

Slot Car Controller Alligator Clips

Slot Car Controller Alligator Clips

You get a set of three (3) clips with the color coded hoods. These should be soldered onto the appropriae controler wires.

$6.75

Details

Qty:

Vibra-Tite VC-3 Threadmate - Non-Hardening Threadlocker

Vibra-Tite VC-3 Threadmate

VC-3 is a non-hardening threadlocker that comes in handy for a variety of HO slot car applications. Traditionally it has been used to keep Wizzard brush barrel screws from backing out during racing. It also is good for lexan body pins to keep bodies secured during a race.

NOTE: The factory has stopped packaging the product in a retail card. Tubes will be shipped in a plastic bag.

Depending on how you apply it, you can use it as a 'glue' or a gap-filling compound. If you mate parts while the VC-3 is freshly applied, it will dry after a point to 'cement' parts in place. But, parts can be pulled apart carefully when needed. If you let the VC-3 flash off before mating parts, it will get stiff and not be tacky. This can create a space-filling application such as lexan body pins for BSRT Scale Auto G3 body posts.

VC-3 has been used with success for securing HC Slots 'clip-on' lexan bodies to their specific chassis application. Most commonly this is the Frog body onto a Tyco 440x2 narrow chassis.

NOTE: Due to supply chain issues with the manufacture, tubes are no longer packaged in sealed cards. There was also a drastic price increase due to labor and materials.

$8.95

Details

Qty:

Viper Scale Racing - Motorbrush Endbell Key

Viper Scale Racing Motorbrush Endbell Key

All new VSR endbell key for V1, Super 7,. Super G+ and BSRT G cars. You get one new VSR endbell key for V1, Super G+ and BSRT G cars.

A must-have tool to properly spread the motorbrush arms inside the endbell so that they do not get damaged installing or removing the armature

$1.25

Details

Qty:

Controllers, Tools, Power Supplies, Accessories

Categories

Shopping Cart

Top Sellers

Information