Drilling of Viper Chassis for .025 Rear Axle Retaining Pins

Cost for drilling any Viper V1 chassis for .025 rear axle retaining pins.   Includes standard HCS AMG rear axle pins. 

This service is only for pining Medium, Firm, and Stiff chassis.  Flexible chassis is not offered.  

 Auto World Super III Style Hard Body Clip for HCS AMG Super 7

One each clip for a Super 7 chassis to run Auto World Super III hard bodies.  Clips are 3-D printed.  Bodies and chassis NOT included - for display only.

Put the front axle into the fartherist front axle holes. This is the 1.7" wheelbase setting. 

Use axle sets and hubs that would work on a Tyco 440x2 Wide-Pan to get the look and ride height correct. 

 Low Rider Style Tomy Super G Plus Style Hard Body Clip

You've been asking for them - NOW you have them ! ! ! One each Low Rider style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original. Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This style clip allows a lower center of gravity with certain Tomy hard bodies.  Some bodies may need relief in certain areas for clearance.  But it is worth the extra handling performance.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Standard Style Tomy Super G Plus Style Hard Body Clip

One each standard style Tomy Super G Plus style hard body clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts like the discontinued Tomy SG+ clip. Clips work as well or better than the original.

Allows fitting many Aurora Magna-Traction, Tomy, and Auto World X-Traction bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Harden Creek Slot Cars - Axle Spacers - .003

These are precision made .003 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

Harden Creek Slot Cars - Axle Spacers - .005

These are precision made .005 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

Harden Creek Slot Cars - Axle Spacers - .010

These are precision made .010 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

Harden Creek Slot Cars - Axle Spacers - .015

These are precision made .015 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

Harden Creek Slot Cars - Axle Spacers - .020

These are precision made .020 thick bronze spacers.  Ideal for spacing armatures and rear axle gear mesh. 

ID is .060 for standard .059 rear axles and armature shafts. 

10 each in the bags. 
 

HCS AMG - Pinion Installation & Removal Tool

The proper tool needed to hold pinion gears while pressing them onto the armature shafts.  Makes short work of installing and adjusting pinion gears.

Pinion capturing pockets are made to handle many popular 7 and 8 tooth gears. 

Top pocket with the .063" nipple hole is a general application hole.

The middle pocket with the .062" nipple hole is great for HCS, JAG, and BSRT 8T gears.

The bottom pocket with the .060" nipple hole is for Viper and BSRT 7T gears.

Blue anodized aluminum with laser engraved numbers.

Replacement Pin for Wheel Hub Puller Tool

 You get One (1) pin to replace bent puller pins. 

To replace pin there are a few things to do.  Remove threaded rod from housing.  The pin is held in by friction and Loctite. 

Heat the pin with a lighter or match.  This will soften the Loctite.  Hold the knob and grasp the pin with pliers and twist the pin and pull and the same time. 

The pin should come out.  New pin may need to be seated into the treaded rod with mild taps from a small hammer.

Note: pin will not work in the Gear & Hub Puller.  That tool has a slightly larger pin. 

Replacement Pin for Wheel Hub & Gear Puller Tool

 You get One (1) pin to replace bent puller pins. 

To replace pin there are a few things to do.  Remove threaded rod from housing.  The pin is held in by friction and Loctite. 

Heat the pin with a lighter or match.  This will soften the Loctite.  Hold the knob and grasp the pin with pliers and twist the pin and pull and the same time. 

The pin should come out.  New pin may need to be seated into the treaded rod with mild taps from a small hammer.

Note: pin will not work in the Wheel Hub Puller.  That tool has a slightly smaller pin. 

HCS AMG - Wheel Hub & Gear Press Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool.  Pushes hubs and gears onto axles in or out of the chassis.  Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs.  Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors. 

This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

HCS AMG - Wheel Hub & Gear Puller Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear removal tool.  Removes gears from rear axles, rear hubs with the axle out of the chassis.  This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Makes short work of pulling and adjusting crown gears and wheel hubs.  Axles not included.

HCS AMG - Wheel Hub Puller Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub removal tool.  Removes rear hubs with the axle in or out of the chassis.  Advanced design allows tool to work in tight quarters to remove or adjust out rear hubs with the axle in the chassis. This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Makes short work of pulling and adjusting wheel hubs.  Chassis not included.

HCS AMG - Wheel Hub & Gear Press Tool

     Press: CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool.  Pushes hubs and gears onto axles in or out of the chassis.  Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs.  Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors. 

     Puller: CNC machined 1 piece Aluminum HO slot car Wheel Hub removal tool.  Removes rear hubs with the axle in or out of the chassis.  Advanced design allows tool to work in tight quarters to remove or adjust out rear hubs with the axle in the chassis. 

These are must have toolswhen rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

HCS AMG - Wheel Hub/Gear Press and Wheel Hub/Gear Puller Tools

     Press: CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool.  Pushes hubs and gears onto axles in or out of the chassis.  Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs.  Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors. 

     Puller: CNC machined 1 piece Aluminum HO slot car Wheel Hub/Gear removal tool.  Removes rear hubs and gears with the axle out of the chassis. 

These are must have tools when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

HCS AMG Front and Rear Armture Bushing

One each front (endbell) and rear machined armature bushing.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front and Rear Armture Bushings

Three each front (endbell) and rear machined armature bushings.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front and Rear Armture Bushings

Five each front (endbell) and rear machined armature bushings.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front Endbell Armature Bushing

One each front (endbell) machined armature bushing.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front Endbell Armature Bushings

Three each front (endbell) machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Front Endbell Armature Bushings

Five each front (endbell) machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Complete Rear Axle Set for Life Like "M" Cars

You get one (1) complete rear axle set: Viper Double Flanged CNC cut hubs,  Life Like 23T Delrin Crown Gear, HCS AMG .438 tires.  Get your ride slammed for best handling!!   .

Chassis NOT included - for display only.  Comes with HCS AMG Life Like Delrin 7T pinion gear.  The pinion will not fit newr  Lfe Like "T" cars. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

Complete cars are for example and NOT included. 

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

Five pairs of front (endbell) and rear Oil-Lite armature bushings.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

Two each front (endbell) and rear Oil-Lite armature bushing.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

Three pairs of front (endbell) and rear Oil-Lite armature bushings.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gear

One each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gears

Three each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Super-Tough Pinion Gears

Five each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Delrin Pinion Gear

One each 7T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Designed after the Tyco 440 nylon pinion gear.  Delrin material offers better wear under tough conditions. Used by many national level racers on Super Stock and Modifed cars.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 7T Delrin Pinion Gears

Five each 7T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Designed after the Tyco 440 nylon pinion gear.  Delrin material offers better wear under tough conditions.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gear

One each 8T Gear. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gears

Three each 8T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

HC Slots AMG Pro-Trax™ 8T Super-Tough Pinion Gears

Five each 8T Gears. Mates with Viper crown gears as well as  HCS AMG, RPMs, Tomy, BSRT, and Tyco crown gears.  Nylon/Glass Filled material offers superior wear under tough conditions. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.
 

HCS AMG Rear Armature Bushings

One each Rear machined armature bushing.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Rear Armature Bushings

Three each Rear machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG Rear Armature Bushings

Five each Rear machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

HCS AMG .025 Rear Axle Retaining Pins

These are precision made 0.025 diameter pins.  Ideal for the Viper V1 chassis.  Can be adapted to other brands of chassis and HO slot cars.  

For Viper V1 chassis, start the hole with an 0.020 bit.  Then follow up with an 0.025 bit. 

10 pins each.  
 

HCS AMG Black Single Flanged Delrin Front and Rear Hub Sets

You get 2 sets of narrow style injection molded Delrin front & rear hubs.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Great for all brands of HO slot cars where performance wheels are needed.  These are the standard hubs used on HCS built Bulldog LX and Super 7 SC cars. 

Front hubs are .277" OD and generally take a standard Tomy SG+, Mega-G and similar tires.  Rear hubs are .288" OD and generally take Mega-G and similar rear tires. 

Tires NOT included.  Completed cars for display only and NOT included. 

(axles  

HCS AMG White Single Flanged Delrin Front and Rear Hub Sets

You get 2 sets of narrow style injection molded Delrin front & rear hubs.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Great for all brands of HO slot cars where performance wheels are needed.  

Front hubs are .277" OD and generally take a standard Tomy SG+, Mega-G and similar tires.  Rear hubs are .288" OD and generally take Mega-G and similar rear tires. 

Tires NOT included.  Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Yellow CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Black CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Blue CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets White CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axle and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Front and Rear Hub Sets Red CNC Machined

You get 1 sets of narrow style CNC machined Delrin front & rear hubs with front axles and front tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the tires.  Rear hubs are .288" OD and measure.

These are the hubs used on HCS built Super 7 SC colored hub cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Single Flanged Delrin Front and Rear Hub Sets with Tires

You get 1 sets of narrow style injection molded Delrin front & rear hubs with tires.  When properly installed with quality HO tire and press tools, they solve lots of problems from cheap factory hubs.

Front hubs are .277" OD and measure .384" OD with the  tires.  Rear hubs are .288" OD and measure .448" with the tires. 

These are the standard hubs used on HCS built Bulldog LX and Super 7 SC cars.  Front hubs come pressed onto the front axle. 

Hub and tire sets are great on Tomy Turbo, SRT, and SG+.  Other applications are possible assuming the chassis performs with the finished sizes. 

Completed cars for display only and NOT included. 

(axles  

HCS AMG Stainless Steel Center Splined  Standard .059 Rear Axles

Priced for 1 each axle. These standard grade axles start with precision cut 1.15 length stainless steel stock.  Center splined to assure positive crown gear placement.  They are great replacements for any Tyco 440, Life Like, or other HO slot cars in standard applications.   
 

HCS AMG Stainless Steel Center Splined  Standard .059 Rear Axles

Price for 3 axles. These standard grade axles start with precision cut 1.15 length stainless steel stock.  Center splined to assure positive crown gear placement.  They are great replacements for any Tyco 440, Life Like, or other HO slot cars in standard applications.   
 

HCS AMG Standard Grade Guide Pins

3 Each . They fit most Aurora A/FX, Magna-Traction, G+, Tomy Turbo, SRT, Super G Plus, BSRT G3, Auto World X-Traction, and Viper V1™ cars.  These guide pins are standard grade made from high quality stainless stee. 

HCS AMG Super 7 Standard Chassis

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium chassis with magnet clip.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

Additional photos show the various clips that can be utilized as well as the installation of aluminum lexan body posts. 

Clips and posts are NOT included and are only for refereance.

HCS AMG Super 7 Standard Chassis - Blue

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - IROC Set

You get one each chassis - Red, White, Blue, Yellow. HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - Red

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - White

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HCS AMG Super 7 Standard Chassis - Yellow

HCS AMG Super 7 Chassis has three front axle positions, better guide pin attachment, and superior chassis material.

You get one medium white chassis with magnet clip and guide pin.  Designed to be the ultimate version of a Tomy hard-body HO slot car. 

Chassis will accept many parts from Tomy Turbo, SRT, Viper Scale Racing, HCS AMG, BSRT, and others. 

A Super 7 motor assembly and traction magnets will be required to properly start you chassis building project. 

HC Slots "Viper Juice" Slot Car Oiler

Just what you need on the work bench or track-side.  The best synthetic oil available. 

Refillable bottle design.

HCS AMG Motor Pinion Gears for Life Like "T"Cars

and Tomy AFX Mega-G+ Chassis

You get five each of gears.  These are the real deal new production run factory made parts.  Replaces motor pinion gears that have stripped out teeth.  Chassis for display only and not included.

Fits 1mm armature shafts.  Can be used on many "Mini Motor" gravity car applications. 

AMG - the Advanced Manufacturing Group of Harden Creek Slot Cars.

Life Like "M" Car Standard Factory 23T Crown  & 7T Pinion Gears

Three each Delrin 23T Crown and 7T Gears molded from original Like Like tooling for "M" cars. 

Gears can be utilized on other brands of HO slot cars when properly fitted.   

 Life Like Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Life Like hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Life Like bodies onto  HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

RPMs Hyper-Rev 21T Orange Super-Tough Crown Gear

One each 21T Gear.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T pinion gears or metal pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 21T Orange Super-Tough Crown Gears

Ten each 21T Gears.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T pinion gears or metal pinion gears - depending on the track and conditions. 

Great gear to build Drag Racing axle sets with. 

RPMs Hyper-Rev 21T Orange Super-Tough Crown Gears

Three each 21T Gears.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T pinion gears or metal pinion gears - depending on the track and conditions. 

Great gear to build Drag Racing axle sets with. 

RPMs Hyper-Rev 21T Orange Super-Tough Crown Gears

Five each 21T Gears.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T pinion gears or metal pinion gears - depending on the track and conditions. 

Great gear to build Drag Racing axle sets with. 

RPMs Hyper-Rev 21T Purple Toughened Crown Gear

One each 21T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 21T Purple Toughened Crown Gears

Ten each 21T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 21T Purple Toughened Crown Gears

Three each 21T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 21T Purple Toughened Crown Gears

Five each 21T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 22T Purple Toughened Crown Gear

One each 22T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 24T Grey Crown Gear

One each 24T Gear.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 4 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with Viper or HCS AMG 7T pinion gears. (priced individually)

RPMs Hyper-Rev 24T Orange Super-Tough Crown Gear

One each 24T Gear.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T pinion gears or metal pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Grey Crown Gear

One each 25T Gear.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 4 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with Viper or HCS AMG 7T pinion gears. (priced individually)

RPMs Hyper-Rev 25T Grey Crown Gears

Five each 25T Gear.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 4 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with Viper or HCS AMG 7T pinion gears. (priced individually)

RPMs Hyper-Rev 25T Grey Crown Gears

Three each 25T Gear.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 4 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with Viper or HCS AMG 7T pinion gears. (priced individually)

RPMs Hyper-Rev 25T Grey Crown Gears

Five each 25T Gear.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 4 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with Viper or HCS AMG 7T pinion gears. (priced individually)

RPMs Hyper-Rev 25T Orange Super-Tough Crown Gear

One each 25T Gear.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T pinion gears or metal pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Orange Super-Tough Crown Gears

Ten each 25T Gear.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T pinion gears or metal pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Orange Super-Tough Crown Gears

Three each 25T Gear.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T pinion gears or metal pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Orange Super-Tough Crown Gears

Five each 25T Gear.  Injection molded super tough material.  Use on level 10 and higher cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T pinion gears or metal pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Purple Toughened Crown Gear

One each 25T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Purple Toughened Crown Gears

Ten each 25T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Purple Toughened Crown Gears

Three each 25T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 25T Purple Toughened Crown Gears

Five each 25T Gear.  Injection molded toughened material.  Use on Super Stock to Level 10 cars.  Profile design with through holes to save weight. Molded in tooth count markings on gear back.  Mate with HCS AMG 7T & 8T, Viper 7T pinion gears - depending on the track and conditions. (priced individually)

RPMs Hyper-Rev 7T Grey Reinforced Nylatron Pinion Gear

One each 7T Gear.  Injection molded Reinforced self-lubircating Nylatron.  Use on level 10 cars and higher.

Profile design with extended tooth profile allows wider range of crown gear applications. 

RPMs Hyper-Rev 7T Grey Reinforced Nylatron Pinion Gears

Thee each 7T Gears.  Injection molded reinforced self-lubircating Nylatron.  Use on level 10 cars and higher.

Profile design with extended tooth profile allows wider range of crown gear applications. 

RPMs Hyper-Rev 7T Grey Reinforced Nylatron Pinion Gears

Five each 7T Gears.  Injection molded reinforced self-lubircating Nylatron.  Use on level 10 cars and higher.  

Profile design with extended tooth profile allows wider range of crown gear applications. 

RPMs Hyper-Rev 7T Grey Nylaron Pinion Gear

One each 7T Gear.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 10 cars.  

Profile design with extended tooth profile allows wider range of crown gear applications. 

RPMs Hyper-Rev 7T Grey Nylaron Pinion Gears

Thee each 7T Gears.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 10 cars.  

Profile design with extended tooth profile allows wider range of crown gear applications. 

RPMs Hyper-Rev 7T Grey Nylaron Pinion Gears

Five each 7T Gears.  Injection molded self-lubircating Nylatron.  Use on stock, super stock, and up to level 10 cars.  

Profile design with extended tooth profile allows wider range of crown gear applications. 

Tyco 440 & HP-7 Standard Factory Aluminum Guide Pins

Five each steel pins.  Specifically for Tyco cars.  Light weight design. 

Tyco 440x2 Pro Quality CNC Machined Steel Guide Pins

Three each steel pins.  Specifically for Tyco 440x2 and similar cars.  CNC machined steel guide pins.  Fits most all Tyco HO slot cars.  

Pro quality design with large top and bottom flanges to eliminate guide pin shifting under load. 

Tyco 440 Standard Factory 7T Pinion Gear

Five each Nylatron 7T Pinion Gears.  Mate with Tyco crown gears as well as Viper, HCS AMG, RPMs Grey, Tomy, and BSRT crown gears.  Tyco pinion gears have a long history of high quality.  Over the years, many HOPRA championship racers have used the Tyco pinion in there Pro Ceramic Super Stock cars

Tyco 440x2 Wide-Pan Hardbody Clip for Super 7, Viper V-1, BSRT G3, Tomy Super G Plus 

You've been asking for them - NOW you have them ! ! ! One each standard Tyco 440x2 Wide-Pan hardbody clip.  Brand New production run. 

These are the REAL DEAL engineered and injection molded parts.  Allows fitting most all Tyco 440x2 Wide-Pan bodies onto HCS Super 7, Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

Not cheap MarkerBot 3D printed globs of 'starter kit' parts that don't fit well and have to be whittled on to work.       

Bodies and chassis NOT included - for display only. 

Vibra-Tite VC-3 Threadmate 

     VC-3 is a non-hardening threadlocker that comes in handy for a variety of HO slot car applications.  Traditionally it has been used to keep Wizzard brush barrel screws from backing out during racing.  It also is good for lexan body pins to keep bodies secured during a race.

NOTE: The factory has stopped packaging the product in a retail card.  Tubes will be shipped in a plastic bag. 

     Depending on how you apply it, you can use it as a 'glue' or a gap-filling compound.  If you mate parts while the VC-3 is freshly applied, it will dry after a point to 'cement' parts in  place.  But, parts can be pulled apart carefully when needed.  If you let the VC-3 flash off before mating parts, it will get stiff and not be tacky.  This can create a space-filling application such as lexan body pins for BSRT Scale Auto G3 body posts.

     VC-3 has been used with success for securing HC Slots 'clip-on' lexan bodies to their specific chassis application.  Most commonly this is the Frog body onto a Tyco 440x2 narrow chassis.

NOTE: Due to supply chain issues with the manufacture, tubes are no longer packaged in sealed cards.  There was also a drastic price increase due to labor and materials. 

Viper HardSpline™ Steel Center Splined  Premium .059 Rear Axles

Priced per each axle. These premium axles start with precision cut 1.15 length billet steel stock.  Center splined to assure positive crown gear placement. Axles are centerless ground, hardened, and nickel plated.  They are great replacements for any BSRT G-3, Tyco 440 car, or other HO slot cars.  
 

Viper HardSpline™ Steel Center Splined  Premium .059 Rear Axles

Price for 5 axles. These premium axles start with precision cut 1.15 length billet steel stock.  Center splined to assure positive crown gear placement. Axles are centerless ground, hardened, and nickel plated.  They are great replacements for any BSRT G-3, Tyco 440 car, or other HO slot cars.  
 

Viper 22T Crown Gear

One each 22T Gear.  Injection molded from the best materials available.  Low profile design to save weight. Molded in tooth count markings.  Mate with Viper 7T pinion gears as well as HCS AMG 7T Delrin, Tomy, BSRT, and Tyco pinion gears.  (priced individually)