Lexan Body for Tomy Turbo & SRT 

      Paint them on the inside or outside - it's some colored plastic to run around the track. Cut the wheel wells as close or open as you like.

     Bodies can be adapted to Aurora Magna-Traction, Aurora G+ wide pan, Tomy Mega-G short wheelbase with the factory hard body clip. 

F-1 Lexan Body for Tomy Super G Plus 

      Paint them on the inside or outside - it's some colored plastic to run around the track. Cut the wheel wells as close or open as you like.

     Body is molded for short wheelbase for closed finders.  Cut the finders off for long wheelbase.

Lexan Body for Tyco 440x2 Narrow 

      Paint them on the inside or outside - it's some colored plastic to run around the track. Cut the wheel wells as close or open as you like.

Lexan Body for Tomy Super G Plus 

      Paint them on the inside or outside - it's some colored plastic to run around the track. Cut the wheel wells as close or open as you like.

Lexan Body for Tyco 440x2 Narrow 

      Paint them on the inside or outside - it's some colored plastic to run around the track. Cut the wheel wells as close or open as you like.

HC Slots Aluminum Lexan Body Pins

$6.49 for 5 Sets

These are precision made aluminum lexan body pins.  Ideal for the Viper V1 and BSRT G-3R chassis.  Can be adapted to other brands of chassis and HO slot cars.  Pins will have to be cut back for use in Wizzard or Slottech cars

You 20 pins each - 5 sets.  
 

HCS '55 Chevy Lexan Body w/ Window Mask Kit - .010

HCS '91 Jaguar XJR-16 GTP-1 Lexan Body - .007

HCS '91 Jaguar XJR-16 GTP-1 Lexan Body - .010

HCS 308 Lexan Body - .007

HCS 308 Lexan Body - .010

HCS 308 Lexan Body Window Masks

$ .99 each Mask Kit

HCS Mustang Trans-Am Lexan Body w/ Window Mask Kit - .010

HCS 917 Lexan Body - .007

HCS 917 Lexan Body - .010

917T Viper Skin Lexan Body for Life Like "T" Cars

      Paint them on the inside or outside - it's some colored plastic to run around the track. Cut the wheel wells as close or open as you like.

You get ONE kit.

HCS AMG 556 GTP Lexan Body - .010

HCS Boss 302 Ford Mustang Lexan Body - .010

HCS Buick Grand National Lexan Body - .010

HCS Buick Stocker Lexan Body - .010

HCS Camaro Pro Stock Lexan Drag Body - .010

HCS Chevy Camaro Lexan Body w/ Window Mask Kit - .010

HCS Dodge A-100 The Little Red Wagon Lexan Body w/ Window Mask Kit - .010 Lexan

HCS Dome Turbo GTP Lexan Body w/ Window Mask Kit - .007

$2.99 each Unpainted body

HCS Dome Turbo GTP Lexan Body w/ Window Mask Kit - .010

$2.99 each Unpainted body

HCS Ferraru 312 PB Lexan Body - .010

HCS Ferrari Daytona Lexan Body - .010

HCS Firebird Pro Stock Lexan Drag Body - .010

HCS Ford F-150 Race Truck Lexan Body - .010 Lexan

HCS Ford Mustang GT Lexan Body - .010

HCS International Race Truck Lexan Body - .010 Lexan

HCS Jaguar XJR GTP-1 Lexan Body - .007

HCS Jaguar XJR GTP-1 Lexan Body - .010

HCS Jaguar XJR-14 GTP Lexan Body - .007

HCS Jaguar XJR-14 GTP Lexan Body - .010

HCS Lancia LC2 GTP Lexan Body - .007

HCS Lancia LC2 GTP Lexan Body - .010

HCS MAN European Supertruck Lexan Body - .010 Lexan

HCS Maxx Lola Can-Am Spyder Lexan Body - .010

HCS Mazda MXR-01 GTP Lexan Body - .007

HCS Mazda MXR-01 GTP Lexan Body - .010

HCS Mercedes C-11 GTP Lexan Body - .007

HCS Mercedes C-11 GTP Lexan Body - .010

HCS Mercedes C-9 GTP Lexan Body - .007

HCS Mercedes C-9 GTP Lexan Body - .010

HCS Mini Cooper Lexan Body w/ Window Masks - .010 Lexan

HCS Nissan GTP Lexan Body - .007

HCS Nissan GTP Lexan Body - .010

HCS Nissan NTP-90 & GTP Lexan Body Window Masks

$ .99 each Mask Kit

HCS Nissan NTP-90 GTP Lexan Body - .007

HCS Nissan NTP-90 GTP Lexan Body - .010

HCS Peugeot 905 GTP Lexan Body w/ Window Mask Kit - .007

HCS Peugeot 905 GTP Lexan Body w/ Window Mask Kit - .010

HCS Pontiac Firebird Lexan Body w/ Window Mask Kit - .010

HCS Pontiac Lumina Stocker Lexan Body w/ Window Mask Kit - .010

HCS Porsche911 RS Lexan Body w/ Window Mask Kit - .010

HCS Porsche911 Turbo Lexan Body w/ Window Mask Kit - .010

HCS Porsche 917/10 Can-Am Spyder Lexan Body - .010

HCS Porsche 917K Lexan Body w/ Window Mask Kit - .007

HCS Porsche 917K Lexan Body w/ Window Mask Kit - .010

HCS Porsche 936 Spyder Lexan Body - .010

HCS Porsche 962C Lexan Body - .010

Sprint Car Lexan Body for Life Like "M" Cars 

Sprint Car Lexan Body for Tomy Super G Plus 

Sprint Car Lexan Body for Tyco 440x2 Wide-Pan Cars 

HCS Z-28 Chevy Camaro Lexan Body - .010

HC Slots Lexan Body Pinning Kit - Aluminum Pins, Outside Tape Discs, Inside Tape Tabs

You get 8 each sets lexan body pins, tape discs and tabs.  These are made from the best materials available.  Body pins are from Scale Engineering. 

Tape discs are  .30" in diameter.  Tape tabs for the inside of the body are .82" long.  

Specifically made for Viper V1, BSRT G-3, and Wizzard chassis running lexan bodies. Can be used on many other brands of HO slot car chassis with lexan body post systems.

Use small, pointed tweezers to pull and place the discs and tabs. Then press in place with nose pliers.

Inside tape tabs are superior top traditional parachute tape.  Parachute tape tends to not lay down well or stay stuck over time.  

Photo shows the tape disc and tab sheets with dye to outline the parts.  You will receive clean and clear sheets. 

Other photos shows the tabs on the inside and the discs on the outside of the body.  

Finished bodies and chassis for display only and NOT included.  

OS3 T-Jet Body Posts for Lexan Bodies

You get One set of posts. They are a direct stick-on assemblies for T-Jet style cars.  OS3 Mounts are ambidextrous pieces that fit on either side of a Tjet.   They have guide ribs to force them into the correct position vertically and are set to the edge of the Clamp recess horizontally.   The mounts are held on by double sided tape and are easily removable and reusable.   Cars can easily switch between hard body and Lexan body classes.   Mounts are pre-taped and ready to mount.   

https://youtu.be/HWMCXt_v1SA

Chassis and lexan body in photos for example only, not included.  

Guaranteed Made in the USA !!! 

Lexan Body for Tyco 440x2 Wide-Pan 

      Paint them on the inside or outside - it's some colored plastic to run around the track. Cut the wheel wells as close or open as you like.

Vibra-Tite VC-3 Threadmate 

     VC-3 is a non-hardening threadlocker that comes in handy for a variety of HO slot car applications.  Traditionally it has been used to keep Wizzard brush barrel screws from backing out during racing.  It also is good for lexan body pins to keep bodies secured during a race.

NOTE: The factory has stopped packaging the product in a retail card.  Tubes will be shipped in a plastic bag. 

     Depending on how you apply it, you can use it as a 'glue' or a gap-filling compound.  If you mate parts while the VC-3 is freshly applied, it will dry after a point to 'cement' parts in  place.  But, parts can be pulled apart carefully when needed.  If you let the VC-3 flash off before mating parts, it will get stiff and not be tacky.  This can create a space-filling application such as lexan body pins for BSRT Scale Auto G3 body posts.

     VC-3 has been used with success for securing HC Slots 'clip-on' lexan bodies to their specific chassis application.  Most commonly this is the Frog body onto a Tyco 440x2 narrow chassis.

NOTE: Due to supply chain issues with the manufacture, tubes are no longer packaged in sealed cards.  There was also a drastic price increase due to labor and materials.