Armatures & Armature Bushings

HCS AMG - Pinion Installation and Removal Tool

HCS AMG - Pinion Installation & Removal Tool

The proper tool needed to hold pinion gears while pressing them onto the armature shafts.  Makes short work of installing and adjusting pinion gears.

Pinion capturing pockets are made to handle many popular 7 and 8 tooth gears. 

Top pocket with the .063" nipple hole is a general application hole.

The middle pocket with the .062" nipple hole is great for HCS, JAG, and BSRT 8T gears.

The bottom pocket with the .060" nipple hole is for Viper and BSRT 7T gears.

Blue anodized aluminum with laser engraved numbers.

$9.95
HCS AMG - Replacement Pin .053" for Wheel Hub Puller Tool

Replacement Pin for Wheel Hub Puller Tool

 You get One (1) pin to replace bent puller pins. 

To replace pin there are a few things to do.  Remove threaded rod from housing.  The pin is held in by friction and Loctite. 

Heat the pin with a lighter or match.  This will soften the Loctite.  Hold the knob and grasp the pin with pliers and twist the pin and pull and the same time. 

The pin should come out.  New pin may need to be seated into the treaded rod with mild taps from a small hammer.

Note: pin will not work in the Gear & Hub Puller.  That tool has a slightly larger pin. 

$1.00
HCS AMG - Replacement Pin .055" for Wheel Hub & Gear Puller Tool

Replacement Pin for Wheel Hub & Gear Puller Tool

 You get One (1) pin to replace bent puller pins. 

To replace pin there are a few things to do.  Remove threaded rod from housing.  The pin is held in by friction and Loctite. 

Heat the pin with a lighter or match.  This will soften the Loctite.  Hold the knob and grasp the pin with pliers and twist the pin and pull and the same time. 

The pin should come out.  New pin may need to be seated into the treaded rod with mild taps from a small hammer.

Note: pin will not work in the Wheel Hub Puller.  That tool has a slightly smaller pin. 

$1.00
HCS AMG - Wheel Hub & Gear Press Tool

HCS AMG - Wheel Hub & Gear Press Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool.  Pushes hubs and gears onto axles in or out of the chassis.  Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs.  Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors. 

This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

$25.95
HCS AMG - Wheel Hub & Gear Puller Tool

HCS AMG - Wheel Hub & Gear Puller Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear removal tool.  Removes gears from rear axles, rear hubs with the axle out of the chassis.  This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Makes short work of pulling and adjusting crown gears and wheel hubs.  Axles not included.

$21.95
HCS AMG - Wheel Hub Puller Tool

HCS AMG - Wheel Hub Puller Tool

     CNC machined 1 piece Aluminum HO slot car Wheel Hub removal tool.  Removes rear hubs with the axle in or out of the chassis.  Advanced design allows tool to work in tight quarters to remove or adjust out rear hubs with the axle in the chassis. This is a must have tool when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Makes short work of pulling and adjusting wheel hubs.  Chassis not included.

$18.95
HCS AMG - Wheel Hub/Gear Press and Wheel Puller Tool Package

HCS AMG - Wheel Hub & Gear Press Tool

     Press: CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool.  Pushes hubs and gears onto axles in or out of the chassis.  Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs.  Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors. 

     Puller: CNC machined 1 piece Aluminum HO slot car Wheel Hub removal tool.  Removes rear hubs with the axle in or out of the chassis.  Advanced design allows tool to work in tight quarters to remove or adjust out rear hubs with the axle in the chassis. 

These are must have toolswhen rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

$42.95
HCS AMG - Wheel Hub/Gear Press and Wheel/Gear Puller Tool Package

HCS AMG - Wheel Hub/Gear Press and Wheel Hub/Gear Puller Tools

     Press: CNC machined 1 piece Aluminum HO slot car Wheel Hub & Gear press tool.  Pushes hubs and gears onto axles in or out of the chassis.  Brass adaptor fits most common machined delrin hubs such as the Viper line of .265, .250, and .275 rear hubs.  Brass adaptor is removeable and frame will take Scale Engineering line of tire press adaptors. 

     Puller: CNC machined 1 piece Aluminum HO slot car Wheel Hub/Gear removal tool.  Removes rear hubs and gears with the axle out of the chassis. 

These are must have tools when rebuilding or building inline HO slot cars.  You'll wonder how you lived this long with out one !!!

Chassis and axles not included.

$45.95
HCS AMG Armature & Rear Standard Bronze Bushing

HCS AMG Front and Rear Armture Bushing

One each front (endbell) and rear machined armature bushing.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$1.95
HCS AMG Armature & Rear Standard Bronze Bushings - Lot of 3

HCS AMG Front and Rear Armture Bushings

Three each front (endbell) and rear machined armature bushings.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$5.49
HCS AMG Armature & Rear Standard Bronze Bushings - Lot of 5

HCS AMG Front and Rear Armture Bushings

Five each front (endbell) and rear machined armature bushings.  Pro quality bronze bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$8.49
HCS AMG Front Endbell Armature Pro Bronze Bushing

HCS AMG Front Endbell Armature Bushing

One each front (endbell) machined armature bushing.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$2.95
HCS AMG Front Endbell Armature Pro Bronze Bushings - Lot of 3

HCS AMG Front Endbell Armature Bushings

Three each front (endbell) machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$8.49
HCS AMG Front Endbell Armature Pro Bronze Bushings - Lot of 5

HCS AMG Front Endbell Armature Bushings

Five each front (endbell) machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$12.49
HCS AMG Oil-Lite Armature & Rear Standard Bushings - Five Pair

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

 

Five pairs of front (endbell) and rear Oil-Lite armature bushings.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$1.99
HCS AMG Oil-Lite Armature & Rear Standard Bushings - One Pair

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

 

Two each front (endbell) and rear Oil-Lite armature bushing.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$0.49
HCS AMG Oil-Lite Armature & Rear Standard Bushings - Three Pair

HCS AMG  "Oil-Lite' Front and Rear Armature Bushings

 

Three pairs of front (endbell) and rear Oil-Lite armature bushings.  Precision Japanese standard bushings.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$1.29
HCS AMG Rear Armature Pro Bronze Bushing

HCS AMG Rear Armature Bushings

One each Rear machined armature bushing.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$2.95
HCS AMG Rear Armature Pro Bronze Bushing - Lot of 3

HCS AMG Rear Armature Bushings

Three each Rear machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$8.49
HCS AMG Rear Armature Pro Bronze Bushing - Lot of 5

HCS AMG Rear Armature Bushings

Five each Rear machined armature bushings.  Pro quality bronze bushings are CAD designed for best oil retention and lowest friction.

For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$12.49
Viper Scale Racing Rear Armature Bushing

Viper Rear Armture Bushing

One each rear machined armature bushing.  For Viper V1, Tomy Super G Plus, and BSRT G3 cars.

 

$1.75